Cellular Type Black Industrial Cooling Tower Drift Eliminator

Basic Info

Air Contact Way	Closed
Tower Shape	Square
Noise Level	Ordinary
Application Fields	Industrial
Condition	New
Color	Carbon Black
Thickness	0.3-0.5mm
Sheet Spacing	30mm
Usage	Mx75 Cooling Tower
Transport Package	Wooden Crate
Specification	length random, width random, height 3145mm
Trademark	Sinta
Origin	Hebei, China
HS Code	3926909090
Production Capacity	50000PCS/Month

Product Description

Cellular Type Black Industrial Cooling Tower Drift Eliminator

is developed when eliminator designs were primarily ineffective blade type configurations. The XCEL generation of eliminators is patented later. No other eliminator could come close to
XCEL eliminator's low drift rate and low pressure drop. Now, virtually every eliminator is a nesting cellular PVC type design.

XCELplus is a more advanced design that meets or exceeds today's demanding specifications for drift emissions without sacrificing fan horsepower. Drift rates are currently half that of the original XCEL design with equivalent pressure drop.

The eliminator discharge angle is important enough to warrant two separate eliminator designs-one for crossflow and one for counterflow towers. Tests show the air direction leaving the eliminator is extremely important-imperfect designs create additional work for the fan. This means either increased fan horsepower-or reduced cooling tower performance. The crossflow version features drainage slots within the eliminator pack to ensure trapped drift is returned to the wet side of the cooling tower.

Low drift rate is the primary goal of eliminator design. XCELplus boasts typical drift rates of .001% of the total GPM. Lower drift rates are available depending upon tower configuration. Considering low drift rates and low pressure drop, XCELplus is one of
the most effective cooling tower drift eliminator available in the market place today.

/ Suggested Specification /

Drift eliminators shall be of cellular type, XCELplus or approved equal. The eliminators shall be thermoformed from 17 mil (.017″) PVC (polyvinyl chloride) material into a configuration providing at least three changes of air direction and solvent welded into multiple sheet packs. Flame spread rating of the material must not exceed 25 per ASTM E-84. Eliminators used in crossflow towers must provide a discharge angle (as defined by the angle of the last section of the eliminator itself) of at least 42° from the horizontal when installed.

The mass drift quantity, determined by the CTI Drift Test Code ATC-140 shall not exceed _______% of the total GPM and shall be guaranteed for all operating conditions.
The eliminator packs shall be able to span 66″ unsupported for counterflow configurations and 72″ for crossflow, with minimal deflection at design conditions. Eliminators shall be FM approved.
Eliminator packs shall measure up to 24″ wide, 5.75″ in depth and up to 12′-0″ long.

Cellular Type Black Industrial Cooling Tower Drift Eliminator pictures:

Cellular Type Black Industrial Cooling Tower Drift Eliminator

package:

Other types cooling tower fill pictures:

cooling tower nozzledrift eliminator