Nbd Series Drift Eliminator/Cellular Type Drift Eliminator/Cooling Tower Drift Eliminator/Efficient Drift Eliminators

Basic Info

Model NO.	NBD
After-sales Service	12 Months
Warranty	12 Months
Cooling Method	Counter Flow or Cross Flow
Ventilation Mode	Mixing Ventilation
Material	PVC
Air Contact Form	Wet and Dry
Air Contact Way	Open
Tower Shape	Blade or Cellular
Noise Level	Low
Application Fields	Cooling Tower
Certification	ISO, CTI
Condition	New
Transport Package	20/40/40hq Container with Loose Packing
Trademark	NEWIN
Origin	China
HS Code	8419909000
Production Capacity	1000000

Product Description

Newin NBD series blade type drift eliminators is applicable to large and medium natural ventilation cooling towers and mechanical ventilation cooling towers.It can remove a large number of small water droplets carried by hot and humid air from cooling towers and avoid pollution to the surrounding environment.After installation, the water mist escape rate decreases from 0.1% when the dehydrator is not installed to 0.05%, but the eliminator has no obvious influence on the cooling water temperature.A set contains eliminator sheets and spacer, PVC rods, PVC nuts.

FEATURES

There are different types, V type, S type, M type, mutiwave type and replacement for other brand cooling towers. Made of flame retardant PVC material, PP material for options if special needed. Anti-aging, high water absorption, low airflow resistance, high strength, easy installation and long service life.Easy installation with rods and screws.

PROPERTIES

With different request in NBD drift eliminators, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Eliminator media in flame retardant or anti-bacterial execution are also available on request.

Module Length (Max)			mm	2000
Module Width			mm	500 / 1000
Module Depth			mm	160 / 175 / 220
Flute Height			mm	25/45/50
Flute Corrugation Angle			degrees	-
Surface Area			m2/m3	0.8
Sheet Thickness - Before Forming			mm	0.8
Sheet Thickness - After Forming			mm	0.6
Max. application temp. (short time) - PVC			°C	60
Max.operating temp. (short time) - PP			°C	90
Customized size and thickness available for special request. Contact Newin for details!

STRUCTURE & INSTALLATION DRAWING

Newin supply structure & installtion drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materals. OEM or special mold design also available on request.

APPLICATION & USAGE

Newin NBD blade drift eliminator is applicable counter flow cooling tower with SGS test in ASTM Standards to keep high quality drift eliminator to get the high efficiency of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.

APPLICABLE COMMERCIAL STANDARDS

Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request.

Property	Test Method	Values
Specific Gravity	ASTM D792-13 Method B	1.426g/cm3
Oxygen Index	ASTM D2863-13	34.50%
Tear Strength	ASTM D1004-13	X direction		111N
		Y direction		121N
Tensible Test	ASTM D 882-12	Tensile Strength	X direction	51.1MPa
			Y direction	45.3Mpa
		Elongation at Break	X direction	87%
			Y direction	56%
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin
Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material.

FILED DATA FOR CELLUAR DRIFT ELIMINATOR REPLACEMENT

Fill in below measurements data for your maintenance cooling tower or reparing projects demand quality and reliability, count on Newin, site visit or maintenance service, engineered to fit the cooling tower fills or components.