mAh Series Cooling Tower Fills/Fill Film 0.38mm Thickness 760/915/1020/1220/1320/1520mm Width

Basic Info

Model NO.	MAH
Noise Level	Low
Application Fields	Industrial
Certification	ISO, CE
Condition	New
Thickness	0.32-0.38 mm
Temperature	-20 Deg C to 65 Degc
Usage	for Refrigerate
Fill Material	PVC or PP or UPVC
Absorption Rate	< 0.015%
Drift Water Loss Rate	<0.001%
Color	Black
Mold Size	618mm
Width	760/915/1020/1220/1320/1520 mm
Sheet Space	19mm
Transport Package	20/40/40hq Container
Specification	760/915/1020/1220/1320/1520 x any length
Trademark	NEWIN
Origin	China
HS Code	3926901000
Production Capacity	1000000mt Per Year

Product Description

MAH Series Cooling Tower Fills/Fill Film 0.38mm thickness 760/915/1020/1220/1320/1520mm Width

MAH series is a hanging film type cooling tower fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. This infill incorporates highly efficient cellular drift eliminators, integrally molded within the fill sheets. Width is available from 760mm to 1520mm to satisfy different cooling towers request.

Specification

Module Length (Max)			mm	3708
Module Width			mm	760/915/1220/1320/1520
Module Depth			mm	-
Flute Height			mm	19
Flute Corrugation Angle			degrees	-
Surface Area			m2/m3	150
Sheet Thickness - Before Forming			mm	0.38
Sheet Thickness - After Forming			mm	0.35
Max. application temp. (short time) - PVC			°C	55
Max.operating temp. (short time) - High temp			°C	80
Customized size and thickness available for special request. Contact Newin for details!

Packing and Loading: LCL shipment: by plywood pallet/case/carton, FCL shipment: by container
Trade Terms: EXW, FOB, CFR,CIF, DDU.
Payment term: T/T, L/C, West UnionMinimum Order Quantity: 1000pcs

STRUCTURE & INSTALLATION DRAWING

Newin supply structure & installation drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materials. OEM or special mold design also available on request.

APPLICATION & USAGE

Newin MAH Film Fill is applicable for Marley cooling tower series of NC, NX,QUADRA FLOW, AQUATOWER, AV, 600 Field Erected, with SGS test in ASTM Standards to keep high quality infill to get the high efficienty of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.

APPLICABLE COMMERCIAL STANDARDS

Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request.

Property	Test Method	Values
Specific Gravity	ASTM D792-13 Method B	1.426g/cm3
Oxygen Index	ASTM D2863-13	34.50%
Tear Strength	ASTM D1004-13	X direction		111N
		Y direction		121N
Tensible Test	ASTM D 882-12	Tensile Strength	X direction	51.1MPa
			Y direction	45.3Mpa
		Elongation at Break	X direction	87%
			Y direction	56%
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin
Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material.

MAH REFERENCE PROJECT CASE