Newin Yn Series Counter Flow Film Fill, Counter Flow Cooling Tower Filler, Round Cooling Tower Infills, Bottle Type Counter Flow Cooling Tower Filling

Basic Info

Model NO.	YN
Noise Level	Low
Application Fields	Industrial
Certification	ISO, CTI
Condition	New
Sheet Space	18 / 25mm
Width	230 / 250 / 300 / 350mm
Transport Package	20/40/40hq Container with Loose Packing
Specification	230 / 250 / 300 / 350mm x any length
Trademark	NEWIN
Origin	China
HS Code	3926901000
Production Capacity	1000000mt Per Year

Product Description

Newin Yn Series Counter Flow Film Fill, Counter Flow Cooling Tower Filler, Round Cooling Tower Infills, Bottle Type Counter Flow Cooling Tower Filling

YN counter flow film fill is widely used in counter flow cooling towers, the product is a cellular block after bonding molding, according to the interval size of the tower bracket, cut into different sizes. Easy to installation. High heat exchange efficiency, small wind resistance, no-easy plugged. PVC, PP material are both available. Customers can choose according to cooling media temperature..

Features

* Advanced technology, reasonable design, with good cooling effect.* Good ventilation, small resistance, strong hydrophilic, large contact area, and good film-forming, easy packing, good heat conductivity, good chemical stability, acid, alkali and organic solvent corrosion, etc.* The staggered ring material form assembling, packing general is 60 ° Angle, polyvinyl chloride (PVC), polypropylene (PP) two kinds of packing material available.

PROPERTIES

With different request in YN film fill, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Fill media in flame retardant or anti-bacterial execution are also available on request.

Module Length (Max)			mm	by roll
Module Height			mm	230 / 250 / 300 / 350
Flute Height			mm	18 / 25
Flute Corrugation Angle			degrees	-
Sheet Thickness - Before Forming			mm	0.3
Sheet Thickness - After Forming			mm	0.3
Max. application temp. (short time) - PVC			°C	60
Max.operating temp. (short time) - PP			°C	80
Customized size and thickness available for special request. Contact Newin for details.

STRUCTURE & INSTALLATION DRAWING

Newin supply structure & installtion drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materals. OEM or special mold design also available on request.

APPLICATION & USAGE

Newin YN counter flow film fill is applicable for counter flow cooling towers and other counter flow cooling tower, with SGS test to keep high quality infill to get the high efficiency of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.

APPLICABLE COMMERCIAL STANDARDS

Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request.

Property	Test Method	Values
Specific Gravity	ASTM D792-13Method B	1.426g/cm3
Oxygen Index	ASTM D2863-13	34.50%
Tear Strength	ASTM D1004-13	X direction		111 N
		Y direction		121 N
Tensible Test	ASTM D 882-12	Tensile Strength	X direction	51.1 MPa
			Y direction	45.3 Mpa
		Elongation atBreak	X direction	87%
			Y direction	56%
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin
Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material.

FILED DATA FOR COUNTER FLOW FILM FILL REPLACEMENT

Fill in below measurements data for your maintenance cooling tower or reparing projects demand quality and reliability, count on Newin, site visit or maintenance service, engineered to fit the cooling tower fills or components.